Ipamorelin 2mg/bottle core introduction
Pharmaceutical-grade peptides | Ipamorelin, made in China
Chemical name : N-[(1S)-1-[[(1S)-1-(acetamido)methyl]-3-(4-aminophenyl)propyl]carbamoyl]-3-(1H-indol-3-yl)propyl]carbamoylmethyl]carbamoyl]carbamoylmethyl]carbamoyl]glycyl]phenylalanine
Sequence : Aib-His-D-2-Nal-D-Phe-Lys-NH₂
CAS No .: 170851-70-4
Specification : 2mg/bottle (lyophilized powder)
Dosage form : Lyophilized peptide preparation for injection
Molecular formula : C₃₈H₄₇N₉O₅
Molecular weight : 711.85 Da
Purity : ≥98% (RP-HPLC detection)
Appearance : White to off-white lyophilized powder
Isoelectric point : pH 8.5-9.0
Solubility : Easily soluble in water and physiological saline.
Storage temperature : -20℃ for long-term storage, 2-8℃ for short-term storage
Storage after reconstitution : Refrigerate at 2-8℃ and use within 24 hours.
Transportation conditions : Transport with ice packs (2-8℃)
Core Function | Core Effects
Iparreline is a selective growth hormone secretagogue receptor agonist , belonging to the third generation of growth hormone-releasing peptides . Due to its highly selective mechanism of action and good safety profile , it has important scientific research value in growth hormone research, anti-aging research, and muscle metabolism regulation .
✅Mechanism of action :
Receptor selectivity : Specific activation of the growth hormone secretagogue receptor (GHSR).
Hormone release : Promotes the release of growth hormone from the pituitary gland.
Pulse mode : mimics the physiological growth hormone pulse release pattern
High selectivity : It exhibits higher selectivity for growth hormone release than other hormones.
✅Quality advantages of Chinese manufacturing :
Solid-phase synthesis process : Fmoc/tBu solid-phase synthesis strategy was adopted.
Microwave-assisted synthesis : Increases condensation efficiency to >99.8%
Preparative HPLC purification : C18 reversed-phase column gradient elution
Freeze-drying technology : Freeze-drying protects peptide stability
Full analytical testing : HPLC, MS, NMR, and amino acid analysis (complete set of tests).
✅Quality Analysis Standards :
HPLC purity : RP-HPLC purity ≥ 98% (detected at 220nm)
Chiral purity : D-amino acid content ≥ 99.8%
Mass spectrometry analysis : ESI-MS confirmed molecular weight [M+H]⁺ 712.86
Peptide mapping analysis : Sequence verification by LC-MS/MS after trypsin digestion
Residual solvent : Complies with ICH Q3C standards
Endotoxin : <1.0 EU/mg
Product Features and Advantages
1. Pharmacological characteristics :
High selectivity : higher selectivity for growth hormone release than GHRELIN
Good safety profile : Does not stimulate the release of cortisol, prolactin, or aldosterone.
Oral activity : It has a certain oral bioavailability.
Metabolic stability : Strong resistance to enzymatic degradation
2. Technical parameters :
Extinction coefficient : ε280 = 5,690 M⁻¹cm⁻¹
Retention time : RP-HPLC C18 column, acetonitrile-water gradient, RT = 12.5 ± 0.5 min
Loss on drying : ≤5.0%
Acetic acid content : 5.0-10.0%
Microbial limits : Total aerobic bacteria count ≤100 CFU/g
3. Advantages of Chinese manufacturing :
Fully automated synthesis : Automated solid-phase synthesizer, reducing human error.
Economies of scale : Large-scale production reduces unit costs
Quality System : A quality management system compliant with cGMP standards.
Research and development capabilities : Possesses research and development capabilities for peptide modification and optimization.
Stable supply chain : a complete upstream raw material supply chain
Usage and Storage Guide
1. Storage conditions :
Unopened : Can be stored for 24 months at -20℃, or for 6 months at 2-8℃.
Avoid repeated freeze-thaw cycles : It is recommended to aliquot and store in smaller containers, each for single use.
Light protection requirement : Brown bottle packaging, avoid light exposure.
Humidity control : Relative humidity ≤ 60%
Once opened : Use immediately, discard any remaining portion.
2. Reconstitution method :
Preparation :
Clean the work surface and prepare a sterile working environment.
Prepare a 1ml sterile syringe
Prepare sterile water for injection or normal saline.
Dissolving steps :
Step 1: Remove the lyophilized powder bottle and allow it to equilibrate to room temperature.
Step 2: Take 1 ml of sterile diluent
Step 3: Slowly pour the diluent along the bottle wall.
Step 4: Gently rotate to dissolve, avoiding vigorous shaking.
Step 5: After complete dissolution, a 2 mg/ml solution is obtained.
Step 6: If a lower concentration is required, further dilute with sterile diluent.
Precautions :
Check the clarity of the solution before use.
Do not use if there is turbidity or sediment.
Use as soon as possible after dissolving.
3. Recommendations for use in cell experiments :
Concentration range : 10⁻¹⁰-10⁻⁶ M
Processing time : 15 minutes - 24 hours
Testing indicators :
Growth hormone release
cAMP level changes
Activation of related signaling pathways
Reference settings :
Blank control
Positive control (GHRP-6)
Solvent control
4. Recommendations for use in animal experiments :
Dosage range : 1-10 μg/kg body weight
Administration routes : subcutaneous injection, intraperitoneal injection
Dosage frequency : 1-3 times daily
Blood collection time : 15, 30, 60, and 120 minutes after drug administration.
Testing indicators :
Serum growth hormone levels
IGF-1 levels
Changes in body weight and food intake
Body composition analysis
5. Pharmacokinetic studies :
Sampling time points : 5, 15, 30, 60, 120, 240 minutes
Detection method : LC-MS/MS
Parameter calculation :
Peak concentration (Cmax)
Peak time (Tmax)
Half-life (t½)
Area under the curve (AUC) during drug administration
Research and application directions
1. Endocrine research :
Growth hormone axis regulation mechanism
Growth hormone pulse release mode
Hypothalamic-pituitary function study
Age-related endocrine changes
2. Metabolic research :
Regulation of protein synthesis metabolism
Fat metabolism and body composition
Energy metabolism balance
Insulin sensitivity regulation
3. Anti-aging research :
The relationship between growth hormone and aging
Tissue regeneration and repair
Cognitive function protection
Immune function regulation
4. Sports Medicine :
Post-exercise recovery mechanism
Muscle protein synthesis
Improved athletic performance
Training Adaptability Research
Why choose Iparelin, made in China?
High purity : HPLC purity ≥98%, ensuring experimental accuracy.
High activity : Bioactivity verified by cell experiments
Stable quality : Strict production process control ensures high batch consistency.
Technical Support : Provides complete analytical data and experimental plans
Cost advantage : Significant price advantage compared to imported products
Reliable supply chain : Complete raw material supply chain, stable supply
Summarize
This product is a high-purity ipareline peptide , produced using advanced solid-phase synthesis and purification technology in China . It provides a high-quality, highly active research tool for growth hormone research, endocrine metabolism research, and anti-aging research . Proper storage, reconstitution, and experimental procedures are crucial to ensuring the reliability of research results.
Need anything, please contact us
|
|
+852 4671 8216 |
|
Telegram |
Allenraws |
|
|
Allenraws810@gmail.com |

Hot Tags: ipamorelin 2mg/vial china peptides freeze-dried powder, China ipamorelin 2mg/vial china peptides freeze-dried powder manufacturers, suppliers, factory, AOD9604 Ideal For Competition Prep Peak Weeks, ace 031 1mg, buy aod 9604 pills, peptide cjc ipamorelin, Alternative to GHRP 6, hgh ipamorelin

