FOXO4-DRI 10mg/bottle core introduction
Anti-aging targeted peptide raw materials | Made in China FOXO4 blocking peptide 10mg/bottle
Generic name : FOXO4-DRI (FOXO4 inhibitory peptide)
Product Name : FOXO4-DRI Selective Interference Peptide
Research Background : Targeted therapeutic peptides designed based on the FOXO4-p53 interaction mechanism
Purity : ≥99.0% (HPLC)
Appearance : White lyophilized powder
Storage : Freeze at -20℃, protect from light, and store in a dry place.
Usage and Storage Guide
1. Reconstitution and preparation :
Recommended solvent :
Preferred solvent : sterile physiological saline or 5% glucose injection
For cell experiments : dissolve in a small amount of physiological saline first, then dilute with serum-free culture medium.
For animal experiments : physiological saline containing 0.1% bovine serum albumin (BSA).
Standard preparation procedure :
Solvent preparation :
Sterile solvent filtered through a 0.22 μm filter membrane was used.
The solvent temperature was restored to room temperature (20-25℃).
Reconstitution procedure :
Add 1.0 mL of the recommended solvent to a 10 mg vial.
Slowly pour the liquid along the bottle wall to avoid direct impact on the freeze-dried block.
Gently rotate the vial until completely dissolved.
Final concentration: 10 mg/mL
Dilution and preparation :
Perform gradient dilution with the appropriate solvent.
In vitro cell experiments: dilute to 1-100 μM
Animal in vivo experiments: Dilute to 1-5 mg/mL
Concentration reference :
In vitro studies : working concentration 5-50 μM
In vivo studies : Mouse models 1-5 mg/kg
Dosage frequency : once daily or every other day
Key points to note :
Dissolution rate : This product dissolves relatively quickly, usually completely dissolving in 2-3 minutes.
Stability : The reconstituted solution is stable for 24 hours at 2-8℃.
Aseptic technique : Performed within a laminar flow hood.
Avoid repeated freeze-thaw cycles: It is recommended to store in smaller portions.
Storage conditions : Store at -20℃ after repackaging, avoid light exposure.
2. Storage conditions :
Unopened raw materials :
Short-term storage : Refrigerate at 2-8℃, shelf life 12 months
Long-term storage : Frozen at -20℃, shelf life 24 months
Optimal storage : -80°C (deep freeze), shelf life 36 months.
Light protection requirement : Must be stored away from light.
Reconstituted solution :
Use immediately : Best results are achieved when used immediately after reconstitution.
Short-term storage : Refrigerate at 2-8℃ for no more than 24 hours.
Long-term storage : Aliquot and freeze at -20℃ for no more than 7 days.
Repeated freeze-thaw cycles are prohibited : a maximum of two freeze-thaw cycles.
Transportation conditions :
Dry ice transportation : transportation below -78℃
Cold chain transportation : 2-8℃ (short-term transport)
Light-proof packaging : sealed aluminum foil bag
Shockproofing : Transported in a special foam box
3. Experimental Application Guidelines :
In vitro cell experiments :
Preparation concentration: 100 μM stock solution
Working concentration: 5-50μM
Processing time: 24-72 hours
Solvent control: Set up a control group with solvent of equal concentration.
Animal in vivo experiments :
Preparation concentration: 1 mg/mL
Dosage: 1-5 mg/kg
Route of administration: intraperitoneal injection or subcutaneous injection
Treatment cycle: Once daily for 5-7 consecutive days.
Quality control :
Check the clarity of the solution before each experiment.
Record preparation time and storage conditions
Regularly test bioactivity
4. Safety procedures :
Personal protection :
Wear lab coats and gloves during the procedure.
Operating inside a biosafety cabinet
Avoid direct skin contact
Waste liquid treatment :
Collected in a dedicated waste liquid container
Treat as a biohazardous material
It must not be discharged directly into the sewer.
Emergency Response :
Skin contact: Rinse immediately with plenty of water.
Eye contact: Rinse immediately with saline solution.
Accidental ingestion: Seek immediate medical attention and provide product information.
Quality Advantages of Chinese Manufacturers
This product is manufactured by a leading peptide R&D and production company in China, meets cGMP standards, and has stable and reliable quality.
✅Advanced production technology :
Solid-phase peptide synthesis : Microwave-assisted synthesis using the Fmoc strategy
Purification process : Three-step purification (ion exchange + hydrophobicity + reversed-phase HPLC)
Quality control : Online monitoring throughout the entire process
Large-scale production : batch production in grams
✅Strict quality inspection :
Purity testing :
HPLC purity ≥ 99.0%
Single impurity ≤0.5%
Total impurities ≤ 1.0%
Molecular weight confirmation :
MALDI-TOF MS precise measurement
Error range ±0.1%
Amino acid analysis :
Amino acid composition analysis
Sequence verification
Bioactivity :
Apoptosis inhibition experiment
FOXO4-p53 binding inhibition rate ≥90%
Specificity verification experiment
Safety inspection :
Bacterial endotoxin <10 EU/mg
Passed sterility test
Heavy metals <20ppm
Physicochemical properties :
Moisture content ≤ 5.0%
Acetate content ≤10.0%
Complete solubility
✅Stability study :
Influencing Factors Experiment :
High temperature: 60℃, stable for 10 days
High humidity: Stable for 10 days at RH 92.5%
Light intensity: 4500 Lx, stabilized after 10 days
Accelerated testing : Stable for 6 months at 40℃/RH75%.
Long-term test : Stable at -20℃ for 24 months
Solution stability :
Physiological saline solution is stable at 2-8℃ for 24 hours.
Stable at -20℃ for 7 days after repackaging
✅Professional Packaging :
Vials : Neutral borosilicate glass vials
Sealing system : Fluorinated butyl rubber stopper + aluminum-plastic cap
Nitrogen purging protection : to prevent oxidation
Light-proof packaging : Double-layer aluminum foil bag sealed
Complete information : Chinese and English labels, traceable batch number.
✅Technical Support :
Provide complete quality documentation
Technical consulting services
Application solution support
Custom synthesis service
R&D cooperation support
Need anything, please contact us
|
|
+852 4671 8216 |
|
Telegram |
Allenraws |
|
|
Allenraws810@gmail.com |

Hot Tags: foxo4 10mg/vial precisely target and eliminate senescent cells, China foxo4 10mg/vial precisely target and eliminate senescent cells manufacturers, suppliers, factory, AOD9604 Ideal For Competition Prep Peak Weeks, ace 031 1mg, buy aod 9604 pills, peptide cjc ipamorelin, Alternative to GHRP 6, hgh ipamorelin

